GRAS 90CA-S2 Microphone Calibration System, PXI

Technology

Introduction

The GRAS 90CA-S2 Microphone Calibration System provides for automated and reliable level and frequency response calibration of measurement microphones. The implemented calibration methods conform with these standards:

  • IEC Standard 61094
  • ANSI S1.10 – 1966 (R1976)
  • IEC Standard 60942
  • TEDS Standard IEEE 1451.4

The 90CA-S2 is based on National Instruments' PXI architecture: NI PXIe-8101 Embedded Controller, including: National Instruments PXIe1071 4-Slot 3U PXI Express Chassis and PXI cards for Control and Data Acquisition.

Features

  • Ready-to-use software and hardware
  • Accurate calibration hardware
  • Automated and computer-controlled calibration process
  • Highly reproducible calibration method
  • Pre-installed test parameters for GRAS microphones
  • Test conditions easily changable
  • Auto-generated, customized documentation to print and archive

Applications

  • All types of IEC 61094 standardized 1", 1/2", 1/4", and 1/8" measurement microphones from GRAS and other manufacturers
  • GRAS 46xx series standard microphone sets
  • GRAS 47xx series flush-mount microphone sets (optional)
  • GRAS preamplifiers
  • Calibration up to 92 kHz (optional up to 200 kHz)

The system is described in more detail in this Product Data sheet and the Instruction Manual.

 

.

Specifications

ANSI standard
S1.10
IEC standard
61094-6


GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Ordering info

Included items

GRAS HW1002 PXI: NI PXIe-8101 Embedded Controller, including: National Instruments PXIe1071 4-Slot 3U PXI Express Chassis
NI Dynamic Signal Acquisition Board PXI-4461, and National Instruments Digital I/O PXI-6509
GRAS SW0013 National Instruments software Diadem version 10.2 (or later), Base Edition
GRAS SW0002 Calibration System Software for 90CA
GRAS SW0012 National Instruments Sound and Vibration Analysis SW Run-Time License 779875-01
For Level Calibration
GRAS AL0017 Pistonphone Calibration Stand
GRAS 42AP Intelligent Pistonphone, including RS-232 control cable
GRAS 26AN ¼” LEMO Insert Voltage Preamplifier
GRAS 26AG ½” LEMO Insert Voltage Preamplifier
For Frequency Calibration
GRAS 26AB ¼” LEMO Preamplifier with Inline Barrel Adapter AF0008 for ¼” preamplifier and ½” microphone
GRAS 26AK ½” LEMO preamplifier (for use with most non-GRAS microphones)
GRAS RA0014 ½” Electrostatic actuator (includes ¼” microphone adapter RA0017)
GRAS AL0010 Actuator Calibration Stand
GRAS AL0021 Microphone Set Calibration Stand
GRAS 14AA Electrostatic Actuator Amplifier, including 230 V AC power cable
For Power, Signal Conditioning and Switching
GRAS 12AQ 2-Channel CCP/LEMO Power Module with Signal Conditioning and Computer Interface
GRAS RA0192 Control box (no cables included in the box)
GRAS 40AG ½” Pressure microphone for reference
Cables, Connectors, Adapters and Tools
GRAS AA2006 National Instruments Cable 180524-10 (50-position ribbon cable)
GRAS AA0033 1 m BNC cable (5 pcs)
GRAS AA0074 1 m LEMO extension cable (2 pcs)
AC0021 BNC T-connector
GRAS RA0003
Straight adapter for ½” microphone and ¼” preamplifier
GRAS RA0063 ⅛ microphone and ¼” preamplifier adapter
RA0081 ½” microphone tool
RA0200 ¼” microphone tool
RA0210 ⅛” microphone tool
Documents
- GRAS license for SW0002
LI0028 90CA Instruction Manual
- Instruction manuals for 42AP, 12AQ and 14AA

 GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Available Options

Special options are available for specific types of calibration, accredited calibration, and training.

GRAS OP0020

  • Preamplifier Calibration Option
  • ½’’ Pressure microphone, prepolarized
  • ¼’’ Preamplifier with 3 m cable
  • ½’’ CCP preamplifier
  • ¼’’ CCP preamplifier with 3 m cable (Microdot connector)
  • 20pF Input adapter for ½’’ preamplifiers
  • 3 m microphone cable, SMB-BNC connector
  • 1 m Cable BNC 50 ohm
  • Test program for preamplifier

GRAS OP0021

  • Calibration of 1” Microphone Option
  • Adapter for 1” microphone and ½” preamplifier
  • 1” Electrostatic actuator

GRAS OP0022

  • Accredited Calibration of Reference Units
  • DANAK calibration of reference microphone, reference preamplifier, and pistonphone

GRAS OP0023

  • Kit for sensitivity calibration of Flush-mount microphone Sets

GRAS OP0024

  • Kit for frequency calibration of Flush-mount microphone Sets

GRAS OP0025

  • Kit for sensitivity calibration of Surface microphone Sets

GRAS OP0026

  • Kit for frequency calibration of Surface microphone Sets

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Get Quote

Industry *
I accept to be contacted regarding my request. I also consent to receive any updates of the data in question. We log data to send you an email with links to the documents requested and provide you with future updates of the data in question.
Please fill google captcha