GRAS 147AX CCP Rugged Pressure Microphone
A new paradigm for engine noise testing
Growing customer expectations increasingly push for noise-reduced cars. Therefore, OEMs continuously struggle to identify and reduce noise sources. Also, the increasing pressure for fast prototyping and shorter “time-to-market” calls for improved and more efficient noise, vibration and harshness (NVH) test methods. Generating reliable data is critical in this process, and it requires using the best measurement microphones for NVH as well as constantly improving the measurement procedures.
The GRAS 147AX Pressure Rugged Microphone has been specially designed to achieve repeatable measurements for engine noise testing in positions that are hard to reach with other types of microphones.
Engine noise testing includes acoustic transfer function (ATF) determination. Most widely used is the reciprocity method with a high number of free-field, standard ½“ microphones fixed to the engine with glue, adhesive tape or mounted on a tripod. This method is cumbersome and very time-consuming, and because the setup is difficult to reproduce, the accuracy of the results is limited.
Microphone positioning is imprecise.
Exact repositioning is virtually impossible.
The free-field characteristics of the microphones do not match the properties of the sound field.
Even minor repositioning differences introduce considerable measurement errors.
Detecting and investigating specific noise sources.
Conventional microphones are easily damaged.
Many OEMs use microphones with a short lifetime, consequently cost of ownership is high.
Learn more about the challenges in NVH testing and how to select the right microphone.
Explore the benefits
The 147AX is optimized to withstand challenging conditions found in an engine bay. It provides easy and repeatable mounting for highly accurate and fast measurement results. With its laboratory precision, extreme ruggedness to match the hot and harsh conditions in an engine bay, as well as a novel form factor and mounting system, the 147AX microphone (patent pending), is destined to become the preferred solution for testing facilities around the world.
Accurate data even during rough testing, e.g. on proving grounds or public roads.
Visual confirmation of status and transducer electronic data sheet (TEDS) reading during power-up ensures efficiency and readiness for data collection.
Small Form Factor
Can be used in small or difficult-to-access spaces where conventional free-field microphones must give up.
Online Calibration Data
Calibration data for each specific microphone can be assessed at gras.dk/e-data.
Water, Oil and Dust-resistant and Replaceable Grid
Can be used in contaminated environments - filter replacement is easy.
Can be mounted close to heat sources.
Microphone-preamplifier housing, including the connection, is certified watertight according to IP67.
Strain-relieved and waterproof connection ensures data integrity and survivability during outdoor tests. The cable is user replaceable.
Wet or moist conditions will not interfere with your measurements.
MagMountTM mounting system
The backside of the 147AX microphone housing has a strong built-in magnet which makes it possible to place the microphone on any flat metal surface without compromising measurements. It is also possible to fix it easily anywhere in the engine bay by use of a mounting disc allowing for fast, precise and repeatable mounting of the microphone – even in confined spaces.
Repeated mounting and demounting will not affect mounting precision or the repeatability of measurements. The same mounting points can be used for cold and hot engine testing, including testing on proving grounds or public roads.
The grid of the 147AX surface-mounted microphone with its built-in filter is easily replaceable whenever the filter is clogged. And the mounting disc can be attached to the test object with glue, double-sided adhesive tape or a screw.
If you need further assistance, visit our Global Support section.
Freq range: 3.15 Hz to 20 kHz
Dyn range: 19 dB(A) to 133 dB
Sensitivity: 45 mV/Pa
Temperature: -40 to +125°C
Humidity: 0 – 90%
147AX is a rugged surface-mounted pressure microphone optimized for engine compartment testing in the automotive industry. It combines the high precision and stability of a laboratory microphone with a high level of ruggedness, including the ability to function properly in the most challenging environment with vibrations, oil mists, water spray and dirt and dust - and high temperatures up to 125°C.
With the 147AX it is now possible to introduce a considerable improvement in the way acoustic engine compartment measurements can be done. The small form factor makes it possible to place the microphones where size constraints previously prevented so. Also, the microphone system's resistance to heat, dirt, oil mists and vibrations makes it possible to make hot engine tests under real-life conditions. A novel mounting system (MagMountTM) makes it easy to mount precisely and ensures very good repeatability, even after full dismounting of the microphones.
Like other members of the GRAS family of microphones for automotive NVH testing, the 147AX is designed to perform optimally under the rough conditions encountered in automobile NVH testing.
The most important design features to accomplish this are:
Vibration resistant and rugged
A new design of the preamplifier and other internal parts makes it resilient to shock and vibrations. It functions well under conditions with vibrations and g-forces from uneven road surfaces and other sudden directional shifts as encountered in real-life driving tests.
The most vulnerable part of any condenser microphone is the diaphragm. In the 147AX a more robust type is used. It can be replaced during repair, keeping maintenance costs at a minimum.
The microphone set works properly up to temperatures of 125°C/257°F. The integrated cable is a high-temperature type. This means that the 147AX can be mounted closely to heat-emitting components and will provide reliable data in all realistic use scenarios.
The microphone-preamplifier assembly is effectively sealed against moisture and is IP67 rated. Special protective water and oil repellent coating adds further protection and makes it easy to clean.
The microphone diaphragm is protected by a grid that has a comprehensive multi-layer filtering system that ensures good protection against high-velocity particles and prevents dirt and dust from polluting the microphone. Provided that the protective grid is replaced at appropriate intervals this system ensures that the microphone will function properly even in very dirty conditions. The filter also protects the diaphragm against water splashes and oil mists.
A customized windscreen is available. Even when turbulence is not a problem it can be used for further protection.
A special connection system with added strain relief is used to provide a robust and watertight connection (IP67) and is sufficiently robust to endure the intended use scenarios. The cable can withstand temperatures up to 125°C/257°F and is oil resistant - if subjected to oil the insulation will not become brittle. The cable and its connection to the microphone are resistant to even heavy vibrations.
A number of cable replacement kits are available for user replacement of the cable. In this way, possible downtime is reduced.
Easy and repeatable mounting - MagMountTM
Compared to traditional, tube-shaped 1/2" microphone sets that are mounted with tape or holders attached to the engine and/or its auxiliary equipment, the 147AX is a surface-mounted microphone designed to be mounted on flat or slightly curved surfaces, for example on the engine compartment walls/boundaries. This normally requires mounting methods that make dismounting difficult and potentially destructive, for example, glue. Such methods can of course still be used, but the new magnetic mounting system called MagMountTM is much easier to work with and provides the basis for better measurement results.
The MagMountTM mounting system consists of a flat metal disc which functions as a mounting base for the microphone, and a magnet at the rear of the microphone housing. The flat metal disc is for mounting at the designated mounting point and can be secured with glue, double-sided bonding tape or a screw. Using the double-sided bonding tape delivered with the 147AX ensures an extremely strong mounting, but using glue may also be a good choice.
When the microphone is placed over the mounting disc, a center guide ensures that the microphone will be attached and centered to the disc correctly once the magnetic force kicks in. In this way, it is easy to mount in difficult-to-access locations with no loss of placement accuracy.
This mounting system makes it possible to mount and dismount the microphone repeatedly even in difficult-to-access spaces where you cannot see what you are doing. When a microphone is dismounted and later remounted, the difference between these two mountings will be only a fraction of a millimeter. In this way, variations in transducer position from test to test are minimized, ensuring very good repeatability even if all microphones have been dismounted between measurements. Also, transducer placement inaccuracies due to operator error are no longer a problem.
This system makes it easy to document how microphones have been placed during a given test, and it makes it possible to identify and prepare measurement positions at an early stage, e.g. before the room in which they will be used is finally assembled.
Combined with the 147AX's ruggedness - in this case, its ability to handle heat and vibrations - this also makes it possible to retain a measurement setup with the same measurement points, even when transitioning to hot engine testing and prolonged testing on proving grounds or public roads.
Even though the microphone will be firmly attached to a vibrating structure, this fact will not prevent proper operation. The microphone itself and all interior parts are designed to work correctly when vibrating. Furthermore, the diaphragm is extremely lightweight with a very small mass. This means it will not react to the vibrations in the same way as an accelerometer at the same location would. Below its resonance frequency at 18kHz, the low mass and high stiffness of the diaphragm reduce the influence of structure born vibrations. Even at the resonance frequency at 18kHz, the dampening is sufficient to prevent a peak similar to that found in accelerometers.
Compared to using traditional tube-shaped microphone sets attached with tape or holders, 147AX’s mounting method is much more stable AND less sensitive to vibrations.
Therefore, at the noise levels expected to be found in the engine bay, the 147AX provides a good signal-to-noise ratio even when mounted on a vibrating structure.
Small form factor
As a surface-mounted microphone, the 147AX can be used where a traditional 1/2" microphone set is too big. Low height allows for placement in difficult-to-access small cavities and near hard reflective surfaces, making it possible to install a microphone where a traditional ½” microphone set is too big to use. As modern engine rooms normally are densely populated this can be a major advantage.
This advantage makes it easier to define microphone placement and to have identical setups over a long time and across models to document the effects of changes. Also, it will often be easier to place microphones close to the individual noise sources that need to be investigated.
The 147AX is a pressure microphone. Where a free-field microphone is designed with a high-frequency roll-off to compensate for the effects of its own presence in the sound field, the response of a pressure microphone is flat. Therefore, when mounted at the boundaries of the sound field inside the engine compartment, a low-profile pressure-field microphone is the better choice, especially at high frequencies.
A special windscreen is available for 147AX and can be a viable option when it is placed in close proximity to airflow, e.g. a fan.
Integrated power LED for status indication
An integrated LED gives status information on power-up and checks, making it easy to verify that the microphone is ready to measure. If there is a faulty connection, the LED will not be lit during power-up. The LED will light up when the TEDS chip is read.
The comprehensive precautions taken to make the 147AX immune to adverse test conditions result in a number of benefits that all translate into time saved and lower costs of ownership. The total life span of the microphone set will be many times that of a conventional microphone set that must be discarded due to damage from dirt, moisture, shock, and vibrations. Also, system and set-up related costs are minimized due to the precise and easily reproducible location of the microphones enabled by the MagMountTM mounting system that makes well-defined measuring points and highly repeatable measurements possible.
The 147AX is a pressure microphone. Unlike a free-field microphone, it will not underestimate the sound pressure in the pressure-field conditions inside an engine bay.
The same microphone set can remain mounted in a test configuration for extended periods of time or remounted very quickly.
Measurement points can be identified and described precisely.
Measurement setups can be recreated easily and precisely, ensuring very good repeatability between measurements.
Separate test results are immediately comparable because the same stable microphones are used at the exact same positions.
TPA and hot engine measurements can easily be compared.
The protection grid with its protective filters can easily be replaced, for example before dirt and oil mists are clogging the meshes.
The CCP (Constant Current Power) technology allows for a low cost per measurement channel.
These advantages mean that the 147AX not only ensures a low cost of ownership but will also contribute to speeding up the development process by improving the quality of your measurements and reducing set-up time, factors that translate into competitive advantages.
The 147AX requires a constant current of 2 mA and a BNC connector. Ready to use standard coax extension cable assemblies of various types and lengths are available. Waterproof, heat and chemical resistant extension cables are also available. It is IEEE 1451.4 TEDS v. 1.0 compliant. If your measurement platform supports Transducer Electronic Data Sheets (TEDS), you will be able to read and write data like properties and calibration data.
The integrated PowerOn indication and the functionality of TEDS are very useful to determine which microphone is connected to which input channel. However, it is not a check of whether the microphone is within specifications or not.
For daily verification and check of your measurement setup, we recommend using a sound source like the GRAS 42AG Multifunction Sound Calibrator with the calibration adapter that is part of the delivery.
Calibration Data for each individual microphone set can be accessed online via the serial number. In this way, you can easily download and configure your analyzer with calibration data. Accessible on-line are also correction data for the protective grid in a format that your analyzer can read at www.gras.dk/e-data.
When our R&D team develops a measurement microphone, it must undergo the most demanding tests to prove that it can withstand our customers' daily test conditions. Using a series of Highly Accelerated Lifetime Tests (HALT) we ensure that our microphones live up to the high quality and precision that our customers have come to expect and trust. Our HALT tests actively accelerate the lifetime of a microphone by simulating the handling and use it is exposed to in real-life situations. By stress testing to the limits, we have been able to optimize the design for robustness and stability.
Service, Warranty and Repair
When leaving the factory, all GRAS microphones have been calibrated in a controlled laboratory environment using traceable calibration equipment. Depending on the use, measurement environment and internal quality control programs we recommend that the microphone is recalibrated at least once a year.
We offer two kinds of calibration as an optional after-sales service: GRAS Traceable Calibration and GRAS Accredited Calibration.
GRAS Traceable Calibration is a traceable calibration performed by trained personnel under controlled conditions according to established procedures and standards. This is identical to the rigorous calibration that all GRAS microphones are subjected to as an integral part of our quality assurance.
GRAS Accredited Calibration is performed by the GRAS Accredited Calibration Laboratory that has been accredited in accordance with ISO 17025 by DANAK, the Danish Accreditation Fund. If you want a new microphone set delivered with an accredited calibration instead of the default factory calibration, please specify this when ordering.
All parts are manufactured and assembled at the factory in Denmark by skilled and dedicated operators in a verified clean-room environment. Our warranty against defective materials and workmanship is 5 years.
147AX is patented in Europe.
GRAS HALT Test Parameters*
Drop - vertical, attached to 2 kg load
Drop - tumbling 1 meter
Vibration - horizontal and vertical
*For a short introduction to HALT, see the section "GRAS HALT" above
**International Protection Marking, IEC standard 60529.
***IP67: Totally protected against dust, protected against the effect of water of up to 1 m of submersion.
IP test according to IEC 60529:2013 performed by DELTA - a part of FORCE Technology, Venlighedsvej 4, 2970 Hørsholm, Danmark. www.delta.dk
Typical frequency response.
Typical noise floor.
GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.
|GRAS 147AX||CCP Rugged Pressure Microphone with 5m integrated BNC cable|
|GRAS GR2172||Mounting Disc|
|GRAS RA0391||Calibration Adapter for 147AX|
|GRAS DB0481||Double-sided adhesive tape for mounting disc|
|GRAS RA0390||Dust, Oil and Water resistant protection grid|
|GRAS AA0107||1 m waterproof/high temperature BNC-BNC extension cable|
|GRAS AA0108||3 m waterproof/high temperature BNC-BNC extension cable|
|GRAS AA0109||10 m waterproof/high temperature BNC-BNC extension cable|
|GRAS RA0393||Cable Replacement Kit, 5 metres|
|GRAS RA0394||Cable Replacement Kit, 10 metres|
|GRAS RA0395||Cable Replacement Kit, 20 metres|
|GRAS RA0396||Cable Replacement Kit, Custom Length, metres|
|GRAS RA0398||Fairing for 147AX|
|GRAS AM0388-2||Windscreen, 5 pcs|
|GRAS RA0392-1||MagMountTM Mounting disc (5 pack) for 147AX, including double-sided adhesive tape|
|GRAS RA0392-10||MagMountTM Mounting disc (50 pack) for 147AX, including double-sided adhesive tape|
|GRAS CA2300||Accredited Calibration|