Accessories

GRAS Sound & Vibration offers a wide range of standard accessories in the form of cables, adapters, windscreens and tripods for use in measuring set-ups. These can be broadly split up under accessories for microphones, for preamplifiers, for outdoor microphones, for pistonphonespistonphones and pinna simulators and accessories for ear simulators. Some are included with certain products, some are available as extras. All can be ordered individually. The brief descriptions given here as well as those on downloadable accessories sheet will help you to select what you need for your particular set-up. At all events, feel free to contact your GRAS partner if you need advice or further information.

GRAS Sound & Vibration also offers a wide range of special products and customised solutions. Our experience within the field of acoustics and vibration, combined with our short development time, enable us to provide innovative solutions to complex measurement problems in close co-operation with the customer. For a technical discussion of your measurement requirements, please contact your local representative or contact GRAS Sound & Vibration directly in Denmark.

GRAS RA0093-S1 1/2" Adjustable Microphone Holder, Stainless Steel

Material: Stainless steel Dimension: For 1/2”
Special feature: Freely adjustable

GRAS RA0093-S1 1/2" Adjustable Microphone Holder, Stainless Steel

The GRAS RA0093-S1 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching at a 1/2" diameter preamplifier. The microphone can be set freely (stepless) in angles between ..

GRAS RA0094 3-Click Holder for Array Module, Stainless Steel

Material: Stainless steel Dimension: For 1/4” & Array modules
Special feature: Adjustable in 45 degree steps

GRAS RA0094 3-Click Holder for Array Module, Stainless Steel

Adjustable, high quality, stainless steel holder for mounting an Array module PR0001 or PR0002 on a tripod. Angular adjustment: 180° in steps of 45° ..

GRAS RA0095 Dehumidifier for 1” microphones

GRAS RA0095 Dehumidifier for 1” microphones

For use when humidity levels are high and only with a rear-vented 1” microphone. An indicator placed on the side of the dehumidifier shows when it needs to be dried out before further use. In the case of the GRAS 40EH 1” Microphone used in the GRAS 40HF Low-noise Level Microp..

GRAS RA0096 1/4" 5-Click Microphone Holder, Stainless Steel

Material: Stainless steel Dimension: For 1/4”
Special feature: Adjustable in 45 degree steps

GRAS RA0096 1/4" 5-Click Microphone Holder, Stainless Steel

The GRAS RA0096 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 1/4" diameter preamplifier. The microphone can be set in angles between 0 and 180 degrees i..

GRAS RA0096-S1 7 mm 5-Click Microphone Holder, Stainless Steel

Material: Stainless steel
Dimension: For 7 mm
Special feature: Adjustable in 45 degree steps

GRAS RA0096-S1 7 mm 5-Click Microphone Holder, Stainless Steel

The GRAS RA0096-S1 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 7mm diameter preamplifier. The microphone can be set in angles between 0 and 180 degrees..

GRAS RA0107 Spacers

GRAS RA0107 Spacers

A set of 6 spacers (50 mm) GR0707 for Array Modules PR0001 and PR0001-1...

GRAS RA0114 Adapter for 1/4” button type hearing aids

Material: Stainless steel

GRAS RA0114 Adapter for 1/4” button type hearing aids

For use with 2cc Coupler RA0113...

GRAS RA0115 Moulding adapter for ITE hearing aids

Material: Black POM

GRAS RA0115 Moulding adapter for ITE hearing aids

For use with 2cc Coupler RA0113...

GRAS RA0116 Adapter for 1/2" microphone

Length: 17.00 mm
Diameter: 23.77 mm
Material: Stainless steel

GRAS RA0116 Adapter for 1/2" microphone

For use with GRAS RA0113 2cc Coupler...

GRAS RA0117 Coupler adapter for 1/2” to 1/4” microphone

Length: 11.60 mm
Diameter: 12.70 mm
Material: Stainless steel

GRAS RA0117 Coupler adapter for 1/2” to 1/4” microphone

The RA0117 is an adapter for mounting a 1/4" microphone in couplers designed for 1/2" microphones...

GRAS RA0118 Attenuator for 1/4" microphones

Length: 22.0 mm
Diam.: 6.35 mm

GRAS RA0118 Attenuator for 1/4" microphones

Recommendation: Choose a microphone with low sensitivity instead of using the RA0118. The RA0118 is an attenuator for inserting between a 1/4" microphone and preamplifier. It attenuates the output signal of the microphone by approximately 16 dB in order to avoid overloading the preamplifier or foll..

GRAS RA0119 Pistonphone Adapter

Material: Black POM

GRAS RA0119 Pistonphone Adapter

A pistonphone adapter for calibration checking the Ear Simulator Type 43AE when a pinna simulator is mounted on the IEC 60711 Ear Simulator RA0045...