The array modules have a single 3 m cable which terminates in a 7-pin male LEMO plug 1B for connecting each array microphone in parallel with a constant-current power supply and a multi-channel facility for signal analyses. A modular design allows multiple-array configurations to suit various measurement requirements using supplied as well as available accessories. In all cases, the pitch distance across Array Modules is maintained at 50 mm.
The array microphones are simply plugged into the numbered SMB sockets (which are pitched at 50mm intervals) of the Array Module.
PR0001: has a central cable connection and is numbered 1 to 6 on one side
PR0001-1: has a lateral cable connection and is numbered 1 to 6 on both sides
Quality & Warranty
G.R.A.S. accessories are made of stainless steel, alloys and high-quality composites. These items are covered by a 2 year warranty respecting their intended use.
On consumables like batteries, cables and windscreen we offer a 6 month warranty.
|G.R.A.S. PR0001||Array module provided with 3 m cable and 7-pin LEMO connector.|
|G.R.A.S. PR0001-1||Same as PR0001 but with lateral cable connection (at the end of the rail).|
|G.R.A.S. PR0001-2||Same as PR0001-1 but the cable connection with 90 degree angle.|
Connection piece for mounting additional Array module horisontally. Connects the ends of two Array modules.
Set of 6 spacers for mounting additional Array module verically and spaced 50 mm.
Top nut for spacers (M5 stainless steel)
10 m LEMO cable
Customized length LEMO cable (XXXX = length in cm)
Split cable 7-pin LEMO to 6x BNC
Split cable 7-pin LEMO to 6x SMB