1. 46BD 1/4" Pressure Set
    Freq range: 4 Hz to 70 kHz
    Dyn range: 44 dB(A) to 166 dB
    Sensitivity: 1.45 mV/Pa

    G.R.A.S. 46BD 1/4" CCP Pressure Standard Microphone Set

    The 46BD is a 1/4" CCP microphone set for pressure measurements. Learn More
  2. 50GI CCP Intensity Probe
    Freq range: Ref. IEC 61043 Class 1
    Dyn range: 27 dB(A) to 163
    Sensitivity: 12.5 mV/Pa

    G.R.A.S. 50GI CCP Intensity Probe

    G.R.A.S. 50GI is a sound intensity probe for direct connection to signal analyzers or data acqusition devices with IEPE inputs. The probe includes a pair of phase-matched prepolarized precision microphones which meet the requirements in IEC standard 61043 for a class-1 intensity probe. The small rugged 1/4" CCP preamplifiers ensure minimum disturbances to the sound field for accurate measurements in the full frequency range.

    Learn More
  3. 50AI-B 1/2"  Intensity Probe
    Freq range: Ref. IEC 61043 Class 1
    Dyn range: 25 dB(A) to 152 dB
    Sensitivity: 25 mV/Pa

    G.R.A.S. 50AI-B 1/2" LEMO Intensity Probe

    The G.R.A.S. 50AI-B Sound-intensity Probe builds on more than 20 years of theory and practical experience in sound-intensity measurements. It is adjustable, durable and fully complies with the requirements in IEC 61043, Electroacoustics- Instruments for the Measurement of Sound Intensity- Measurements with Pairs of Pressure Sensing Microphones, 1993 for Class 1 Sound-intensity probes.

    Learn More
  4. 50VI-1 Vector intensity probe
    Freq range: IEC 61043 Class 1
    Dyn range: 25 dB(A) to 152 dB
    Sensitivity: 25 mV/Pa

    G.R.A.S. 50VI-1 Vector intensity probe

    The G.R.A.S. 50VI-1 Vector Intensity Probe is a flexible and adjustable, two or three-dimensional sound-intensity probe. The probe handle has marked inputs for 3 pairs of preamplifiers (a pair for each of the mutually-perpendicular directions) and a 24-pin LEMO output socket at its base for connecting it to a suitable Power Module (e.g. Type 12AC) or Power Modules (via cable adapter).

    Learn More
  5. 44AA Mouth Sim ITU-T P51, power amp
    ITU-T rec.: P.51
    Special feature: Built-in power amplifier

    G.R.A.S. 44AA Mouth Simulator according to ITU-T Rec. P51 with built-in power amplifier

    G.R.A.S. 44AA Mouth Simulator  is a sound source which simulates the sound field around the human mouth at close quarters and complies with the Standards IEEE 269, 661 and ITU-T Rec. P51.

    G.R.A.S. 44AA is for testing telephone mouthpieces as well as other microphones similarly used in communication networks.

    Learn More
  6. 44AB Mouth Sim ITU-T P51
    ITU-T rec.: P.51
    IEEE standards: 269, 661

    G.R.A.S. 44AB Mouth Simulator according to ITU-T Rec. P51

    G.R.A.S. 44AB Mouth Simulator is a sound source which simulates the sound field around the human mouth at close quarters and complies with the Standards IEEE 269, 661 and ITU-T Rec. P51.

    G.R.A.S. 44AB is for testing telephone mouthpieces as well as other microphones similarly used in communication networks.

    Learn More
  7. 45CB Acoustic Test Fixture
    ANSI: S12.42

    G.R.A.S. 45CB Acoustic Test Fixture

    The G.R.A.S. 45CB Acoustic Test Fixture is specified and designed for measuring sound isolation of hearing-protectors and ear- and headphones according to the ANSI/ASA S12.42 standard. For testing in accordance with the ISO 4869-3 standard, choose G.R.A.S. 45CA.

    Learn More
  8. RA0020 1/2" Nosecone

    Length: 54.0 mm
    Outer diameter: 13.2 mm
    Threading (mic. protection grid threading): 12.70-60 UNS-2
    Material: Stainless steel
    Weight: 45 g

    G.R.A.S. RA0020 1/2" Nosecone

    The RA0020 is specially designed and optimized for use with 1/2" microphones for sound pressure measurements, when high speed wind comes from one known direction e.g. in a wind tunnel.
    Learn More
  9. RA0058 1/2'' to 1'' Microphone Adapter

    Length: 17.00 mm
    Diameter: 23.77 mm
    Material Stainless steel

    G.R.A.S. RA0058 1/2'' to 1'' Microphone Adapter

    Dimension adapter which increases the diameter of a 1/2" microphone to 1". The adapter is relevant for use with G.R.A.S. 45CA Hearing-protector test fixture or in other situations where a 1/2" microphone is to be mounted in a 1" inner diameter hole/cylinder.

    Learn More
  10. 45BB-4 For Sound Quality Recording, 2-Ch CCP
    Connection: Constant Current Power (0 V/CCP)
    Channel(s): 2
    ANSI: S3.36
    ITU-T Rec. P.57 Type 3.3 based on ITU-T Rec. P.58

    G.R.A.S. 45BB-4 KEMAR Head & Torso for Sound Quality Recording, 2-Ch CCP

    The 45BB-4 KEMAR Head and Torso for Sound Quality Recording is an acoustic research tool with built-in 1/2" microphones for realistic sound quality testing and recordings. It is easy ro replace the 1/2" microphones with 1/4" microphones if preferred. Its LEMO equivalent is G.R.A.S. 45BB-3 KEMAR Head & Torso for Sound Quality Recording, 2-Ch LEMO.

    Learn More
  11. 45BC-3 With Mouth Sim for Telephone Test, 1-Ch LEMO
    Connection: Traditional Power Supply (200 V/LEMO)
    Channel(s): 1
    ANSI: S3.36, S3.25
    IEC: 60318-4
    ITU-T Rec. P.57 Type 3.3 based on ITU-T Rec. P.58
    Special feature: Built-in power amplifier for mouth simulator

    G.R.A.S. 45BC-3 KEMAR Head & Torso with Mouth Simulator for Telephone Test, 1-Ch LEMO

    The 45BC-3 KEMAR Head & Torso with Mouth Simulator for Telephone Test, 1-Ch LEMO is configured with pinnae and with IEC 60318-4 Ear Simulator and ear canal extension in the right ear. Due to the design of KEMAR, realistic measurement in a sound environment as experienced by a human being using a hearing aid is possible. In addition, the 45BC-3 is provided with a mouth simulator for testing of the microphone in the telephone. The 45EA handset positioning system is included. Its CCP equivalent is G.R.A.S. 45BC-4 KEMAR Head & Torso with Mouth Simulator for Telephone Test, 1-Ch CCP.

    Learn More
  12. 45BC-4 With Mouth Sim for Telephone Test, 1-Ch CCP
    Connection: Constant Current Power (0 V/CCP)
    Channel(s): 1
    ANSI standards: S3.36, S3.25
    IEC standards:60318-4 (formerly 60711), 60318-7 (formerly 60959)
    Special feature: Telephone test

    G.R.A.S. 45BC-4 KEMAR Head & Torso with Mouth Simulator for Telephone Test, 1-Ch CCP

    The 45BC-4 KEMAR Head & Torso with Mouth Simulator for Telephone Test, 1-Ch CCP is configured with pinnae and with IEC 60318-4 Ear Simulator and ear canal extension in the right ear. Due to the design of KEMAR, realistic measurement in a sound environment as experienced by a human being using a hearing aid is possible. In addition, the 45BC-3 is provided with a mouth simulator for testing of the microphone in the telephone. The 45EA handset positioning system is included. Its CCP equivalent is G.R.A.S. 45BC-3 KEMAR Head & Torso with Mouth Simulator for Telephone Test, 1-Ch LEMO.

    Learn More
  13. 46BL 1/4" Pressure Set, High Sensitivity
    Freq range: 4 Hz to 20 kHz
    Dyn range: 25 dB(A) to 147 dB
    Sensitivity: 18 mV/Pa

    G.R.A.S. 46BL 1/4" CCP Pressure Standard Microphone Set, High Sensitivity

    The 46BL is a high-sensitive, low-noise 1/4" CCP condenser microphone set with rear-venting.

    The set consists of a 40BL 1/4" CCP Pressure Microphone, High Sensitivity and a 26CB 1/4" preamplifier with Microdot connector.

    Learn More
  14. 50GI-R Intensity Probe with Remote Control
    Freq range: IEC 61043 Class 1
    Dyn range: 27 dB(A) to 163 dB
    Sensitivity: 12.5 mV/pa

    G.R.A.S. 50GI-R CCP Intensity Probe with Remote Control

    The 50GI-R is a sound intensity probe for direct connection to signal analyzers or data acquisition devices with IEPE inputs. The probe includes a pair of phase-matched prepolarized precision microphones which meet the requirements in IEC standard 61043 for a class-1 intensity probe. The small rugged ¼" CCP preamplifiers ensure minimum disturbances to the sound field for accurate measurements in the full frequency range.

    Learn More
  15. RA0038 1/2'' 2cc Coupler IEC 60318-5
    Volume: 2 cc
    ANSI: S3.7
    IEC: 60318-5
    Special feature: For 1/2" pressure microphones

    G.R.A.S. RA0038 1/2'' 2cc Coupler according to IEC 60318-5

    The G.R.A.S. RA0038 Coupler is a standard 2 cm³ Coupler according to IEC 126 and ANSI S3.7-1973. It uses a ½" microphone (preferably the G.R.A.S. 40AG) with a suitable preamplifier (e.g. G.R.A.S. 26AC which is a ¼" preamplifier but is supplied with an adapter for ½" microphones).

    Learn More
  16. RA0045-S1 Prepol Ear Sim IEC 60318-4 (60711)
    Volume: 1260 mm³ @ 500 Hz
    Dyn range: 25 dB(A) to 150 dB
    IEC: 60318-4

    G.R.A.S. RA0045-S1 Prepolarized Ear Simulator According to IEC 60318-4 (60711)

    G.R.A.S. RA0045-S1 is an ear simulator with an acoustic input impedance closely resembling that of an average human ear. The RA0045 includes a 40AO 1/2" prepolarized pressure microphon and each RA0045 is individually calibrated with this specific microphone.

    Learn More
  17. 43AI CCP Ear Sim Prod Test ITU-T P57 3.2 HL
    Connection: 0 V/CCP
    Volume: Complex
    Dyn range: 25 dB(A) to 150 dB
    ANSI: S3.7

    G.R.A.S. 43AI CCP Ear Simulator for Production Testing Based on ITU-T Rec. P57 Type 3.2 High-leak

    The G.R.A.S. 43AI ear simulator consists of the ITU-T Rec. P.57 Type 2 Ear Simulator and Type 3.2 Simplified High-leak Pinna Simulator and is designed for making ITU-T standardized tests of telephone handsets, receivers and receiver/loudspeaker-modules on the production line.

    Learn More
  18. 40BE 1/4" Free-Field Mic
    Freq range: 4 Hz to 80 kHz
    Dyn range: 30 dB(A) to 168 dB
    Sensitivity: 4 mV/Pa

    G.R.A.S. 40BE 1/4" Prepolarized Free-Field Microphone

    The 40BE is an IEC 61094 WS3F 1/4” prepolarized free-field microphone with rear-venting. The externally polarized equivalent is 40BF.

    Learn More
  19. 40EN 1" Pressure Mic
    Freq range: 2.6 Hz to 8 kHz
    Dyn range: 9.6 dBA to 146 dB
    Sensitivity: 50 mV/Pa

    G.R.A.S. 40EN 1" Ext. Polarized Pressure Microphone

    The 40EN is an IEC 61094 WS1P 1" externally polarized pressure microphone. It is a 1" pressure microphone that is ideal for measurements in couplers used for testing earphones. When flush-mounted, it can measure sound pressures at boundaries. It is highly suited as a laboratory-standard microphone.

    Learn More
  20. 40SC CCP Probe Mic
    Freq range: 2 Hz to 8 kHz
    Dyn range: 40 dB to 160 dB
    Sensitivity: 3 mV/Pa

    G.R.A.S. 40SC CCP Probe Microphone

    The CCP Probe Microphone 40SC is a small, constant-current powered, compact unit for sound-pressure measurements in small enclosures, in harsh environments and in very close proximity to sound sources. The high acoustic input impedance at the tip of the probe minimizes its influence on the acoustic field, while the stainless-steel tube of the probe can withstand temperatures of up to 800 ºC.

    Learn More

Items 1 to 20 of 144 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction