The 40EU is an IEC 61094 LS1P 1" externally polarized pressure microphone that is rear-vented.
It is a 1" pressure microphone that is ideal for measurements in couplers used for testing earphones. When flush-mounted, it can measure sound pressures at boundaries. It is highly suited as a laboratory-standard microphone.
40EU is individually factory-calibrated and delivered with a calibration chart stating its specific open-circuit sensitivity and pressure frequency response.
Typical applications and use
40EU can be used in precision reciprocity calibrations because it is a linear reversible transducer. This means that the electrical energy emitted by the 40EU is strictly or linearly proportional to the acoustical energy it receives. This is exactly what is required for such calibrations. When carefully handled, the 40EU can retain its calibrated properties for many centuries.
The 40EU is also highly suited as a laboratory reference for secondary calibration of working-standard microphones.
The 40EU requires a standardized ½" LEMO preamplifier and an input module that supports this technology with a 7-pin LEMO connector.
For more information, see System Setup.
For daily verification and check of your measurement setup, we recommend using a calibrator like G.R.A.S. Sound Level Calibrator 42AB
For proper sensitivity calibration, we recommend using a pistonphone like G.R.A.S. Intelligent Pistonphone 42AP
Quality and warranty
All G.R.A.S. microphones are made of high-quality materials that will ensure life-long stability and robustness. The microphones are all assembled in verified clean-room environments by skilled and dedicated operators with many years of expertise in this field.
The microphone diaphragm, body, and improved protection grid are made of high-grade stainless steel, which makes the microphone resistant to physical damage, as well as corrosion caused by aggressive air or gasses.
This, combined with the reinforced gold-plated microphone terminal which guarantees a highly reliable connection, enables G.R.A.S. to offer 5 years warranty against defective materials and workmanship.
Learn more about G.R.A.S.' unique warranty policies.
If you accidentally damage the diaphragm on a G.R.A.S. microphone, we can—in most cases—replace it at a very reasonable cost and with a short turn-around time. This not only protects your investment, but also pleases your quality assurance department because you don't have to worry about new serial numbers, etc.
Learn more about G.R.A.S.' service program.
Before leaving the factory, all G.R.A.S. microphones are calibrated in a controlled laboratory environment using traceable calibration equipment.
Depending on the use, measurement environment, and internal quality control programs, we recommend recalibrating the microphone at least once a year.
Learn more about G.R.A.S.' calibration services.
|Frequency range (±2 dB)||Hz||2.6 to 8 k|
|Dynamic range lower limit (microphone thermal noise)||dB(A)||9.6|
|Dynamic range lower limit with G.R.A.S. preamplifier||dB(A)||14|
|Dynamic range upper limit||dB||146|
|Dynamic range upper limit with G.R.A.S. preamplifier @ +28 V / ±14 V power supply||dB||139|
|Dynamic range upper limit with G.R.A.S. preamplifier @ +120 V / ±60 V power supply||dB||151|
|Open-circuit sensitivity @ 250 Hz (±1 dB)||mV/Pa||50|
|Open-circuit sensitivity @ 250 Hz (±1 dB)||dB re 1V/Pa||-26|
|Microphone cartridge capacity, typical||pF||56|
|IEC 61094 designation||LS1P|
|Temperature range, operation||°C / °F||-40 to 150 / -40 to 302|
|Temperature range, storage||°C / °F||-40 to 85 / -40 to 185|
|Temperature coefficient @250 Hz||dB/°C / dB/°F||0.0003 / -|
|Static pressure coefficient @250 Hz||dB/kPa||-0.0016|
|Humidity range non condensing||% RH||0 to 100|
|Humidity coefficient @250 Hz||dB/% RH||-0.0013|
|Influence of axial vibration @1 m/s²||dB re 20 µPa||67|
|CE/RoHS compliant/WEEE registered||Yes / Yes, Yes|
|Weight||g / oz||32 / 1.129|
|RA0073||Adapter for 1” Microphone and ½” Preamplifier|
|RA0017||Adapter for 1” Microphone and ½” Preamplifier|