Typical applications and use
- Flush mounting in confined spaces
- Flush mounting in clay models
- Ground array measurements
- General noise measurements
With a height (to the diaphragm) of only 8 mm, 47AX is suitably designed for flush mounting in plates in ground array applications and other applications with size constraints. The microphone is a prepolarized pressure microphone with a dynamic range from 22 dBto 146 dB and a frequency range from 3.15 Hzto 20 kHz. The built-in preamplifier is a low noise constant current power (CCP) type, with a built-in TEDS circuit for automatic transducer identification. The set has an integrated 1.5 m cable with Microdot connector plus an adapter for BNC cable.
Flush-mounting is ideal where holes can be made in the structure, such as a clay model, to accommodate the front-vented 47AX. A back-vented version is also available, the 47AX–S1.
It is included with the G.R.A.S. 67BX Ground Array Set, which has a 400 mm diameter mounting plate.
The 47AX is based on the IEC 61094 standardfor measurement microphones.
|Frequency range (±1 dB)||Hz||TBD|
|Frequency range (±2 dB)||Hz||TBD|
|Frequency range (±3 dB)||Hz||TBD|
|Dynamic range lower limit (microphone thermal noise)||dB(A)||TBD|
|Dynamic range lower limit with G.R.A.S. preamplifier||dB(A)||TBD|
|Dynamic range upper limit||dB||TBD|
|Dynamic range upper limit with G.R.A.S. preamplifier @ +28 V / ±14 V power supply||dB||TBD|
|Dynamic range upper limit with G.R.A.S. preamplifier @ +120 V / ±60 V power supply||dB||TBD|
|Dynamic range upper limit with G.R.A.S. CCP preamplifier||dB||TBD|
|Open-circuit sensitivity @ 250 Hz (±2 dB)||mV/Pa||TBD|
|Open-circuit sensitivity @ 250 Hz (±2 dB)||dB re 1V/Pa||TBD|
|IEC 61094 designation||TBD|
|Temperature range, operation||°C / °F||TBD / TBD|
|Temperature range, storage||°C / °F||TBD / TBD|
|Temperature coefficient @250 Hz||dB/°C / dB/°F||TBD / TBD|
|Static pressure coefficient @250 Hz||dB/kPa||TBD|
|Humidity range non condensing||% RH||TBD|
|Humidity coefficient @250 Hz||dB/% RH||TBD|
|Influence of magnetic field @80 A/m, 50 Hz||dB re 20 µPa||TBD|
|Influence of axial vibration @1 m/s²||dB re 20 µPa||TBD|
|Connector type||3 m 7-pin LEMO Cable|
|CE/RoHS compliant/WEEE registered||No/No|
|Weight||g / oz||/ TBD|