G.R.A.S. 26AK is a preamplifier designed for general purpose in the laboratory and field and accommodates directly for all IEC 61094 standardized ½” externally polarized measurement microphones.
It is rugged and reliable and can handle microphone signals up to 50 Vpeak within 2 Hz to 200 kHz. The printed circuit board is made by use of thick-film substrate technology and optimized with respect to maximum suppression of microphonics and moisture rejection.
The high-quality, standard 7-pin LEMO male connector is integrated into the preamplifier and ensures that only one type of connector and cable is required for both connection and extension.
26AK is factory calibrated individually and delivered with a calibration chart stating its A-weighted and linear self-noise.
These preamplifiers are compatible with ½-inch microphones as defined in international standard IEC1094 Measurement Microphones, Part 4: Specifications for working standard microphones. The mounting thread (11.7 mm - 60 UNS-2) is compatible with other available makes of similar microphone preamplifiers.
G.R.A.S. 26AK is integrated with a 7-pin LEMO series 1B plug.
|Frequency response (±0.2 dB) with 18 pF microphone dummy and 4.7 nF cable load||Hz||2.5 to 200 k|
|Input impedance||GΩ // pF||20 // 0.4|
|Output Voltage Swing, max. @ ±14V/+28V power supply||Vp||10|
|Output Voltage Swing, max. @ ±60V/+120V power supply||Vp||50|
|Noise (A-Weighted) maximum||µV||2.5|
|Noise (A-Weighted) typical||µV||1.8|
|Noise (Linear 20 Hz – 20 kHz) maximum||µV||6|
|Noise (Linear 20 Hz – 20 kHz) typical||µV||3.5|
|Power supply, single||V||28 to 120|
|Power supply, balanced||V||+-14 to +-60|
|DC-offset, minimum, single suppy||V||0.5 x Vs - 1|
|DC-offset, maximum, single suppy||V||0.5 x Vs + 4|
|Temperature range, operation||°C / °F||-30 to 70 / -22 to 158|
|Temperature range, storage||°C / °F||-40 to 85 / -40 to 185|
|Humidity range non condensing||% RH||0 to 95|
|Humidity coefficient @250 Hz||dB/% RH||TBD|
|Connector type||7-pin LEMO (FGG.1B.307)|
|CE/RoHS compliant/WEEE registered||Yes / Yes, Yes|
|Weight||g / oz||TBD / TBD|
|Weight with cable and connector||g / oz||TBD / TBD|
|G.R.A.S. AA0008||3 m extension cable (7-pin1B LEMO)|
|G.R.A.S. AA0008||10 m extension cable (7-pin1B LEMO)|
|G.R.A.S. AA0012||30 m extension cable (7-pin1B LEMO)|
|G.R.A.S. AA0014||100 m extension cable (7-pin1B LEMO)|
|G.R.A.S. RA0017||1-inch to ½-inch adaptor for use with G.R.A.S. 1-inch microphones|
|G.R.A.S. RA0019||¼-inch to ½-inch adaptor for use withG.R.A.S. ¼-inch microphones|