|
|
Related Products:
Adobe Acrobat reader is required for viewing data sheets. |
;) Type 26AJGeneral-purpose preamplifier with an integrated 7-pin LEMO connector. Includes SysCheck facility for enabling easy system checks to be made. A 3 m cable AA0008 (not included) is available with 7-pin to 7-pin LEMO connectors. Other lengths are available on request |
|
;) Type 26AMGeneral-purpose preamplifier with an integrated 3 metre cable terminating in a 7-pin LEMO connector |
|
;) Type 26AHGeneral-purpose preamplifier with an integrated 3 metre cable terminating in a 7-pin LEMO connector. Includes SysCheck facility for enabling easy system checks to be made. |
|
;) Type 26AGPreamplifier with an integrated 7-pin LEMO connector. Configured for use with the insert-voltage technique for determining the open-circuit sensitivity of a microphone cartridge. A 3 m cable AA0008 (not included) is available with 7-pin to 7-pin LEMO connectors. Other lengths are available on request |
|
;) Type 26TKPreamplifier with an integrated 7-pin LEMO connector. Includes built-in TEDS* chip which enables it to be programmed with calibration data as a complete unit with a microphone cartridge. A 3 m cable AA0008 (not included) is available with 7-pin to 7-pin LEMO connectors. Other lengths are available on request. |
|
| Download Product Data: PD_26AG_AH_AJ_AK_AM_TK_ver_04_Feb_2010 * Transducer Electronic Data Sheet according to IEEE-1451.4. |
;)
| Frequency range: |
2 Hz - 200 kHz (±0.2 dB) |
| Input impedance: |
0.4 pF, 20 G Ohm |
| Output impedance: |
(typical) 55 Ohm |
| Output connector: |
7-pin LEMO male |
| Power supply, Single: |
28 V, 0.7 mA to 120 V, 2.5 mA |
| and Dual: |
±14 V, 0.7 mA to ±60 V, 2.5 mA |
| Noise: A-weighted and: |
< 2.5 µV (typically 1.8 µV) rms |
| linear (20 Hz - 20 kHz): |
< 6 µV (typically 3.5 µV) rms |
| Gain: |
–0.25 dB (typical) |
| Operating temperature: |
–30 °C to + 70 °C |
| Storage temperature: |
–40 °C to + 85 °C |
| Dimensions: (ex. cable): |
diameter: 12.7 mm (½") |