½" Low-noise Level Microphone System - Type 40HH

The ½" Low-noise Level Microphone System Type 40HH can measure noise levels well below the threshold of human hearing. 

It is amply suitable for acoustic measurements on even very quiet products, e.g. disk drives and other computer products, as well as in quiet rooms.

It has a wide dynamic range which enables measurements from below -2 dBA re. 20µPa (in ¹/₃-octave bands) in a frequency range from 20 Hz to 20 kHz.

The Type 40HH comprises the following two specially-designed components:

• a high-sensitive ½" microphone (Type 40AH)
• a low-noise ½" microphone preamplifier (Type 26HH)

The microphone and its preamplifier are an individually matched combination.
 
The system can be switched to operate either for pressure measurements or free-field measurements.

To complete the measuring system, one of the following special power modules is required and is available from G.R.A.S., i.e.

• Type 12HF for single-channel measurements
• Type 12HM for multi-channel (1 to 10) measurements

The chosen power module provides all necessary voltages for powering the preamplifier(s) as well as polarising the microphone(s). It also has a two-position switch for selecting which microphone operation to use, i.e. pressure or free-field.

The following high-quality extension cables are available for the preamplifier:

• AA0046    3m
• AA0047    10m
• AA0048    30m

Download Product Data: Type 40HH_ver_27 Aug 2010

Related Products:

Type 40HF
Type 40HL
Type 40HT

Adobe Acrobat reader is required for viewing data sheets.

System 0.75 V/Pa

Microphone 75 mV/Pa

12.5 Hz – 10 kHz ± 1 dB

10 Hz – 16 kHz ± 2 dB

6 Hz – 20 kHz + 2 dB, –3 dB

6.5 dBA to 113 dB re. 20µPa